“Audio renderer error. Please restart your computer.” Are you getting this error when you try to play audio or stream videos on YouTube? Well, it means that your audio drivers are not entirely synchronized with the operating system.
This error is not specific to any browser and may occur while accessing content on various streaming platforms, particularly YouTube. While the audio rendering issue can occur on any Windows OS version, it is more prevalent on Windows 10 version 1803. It may be triggered by a number of things, ranging from a faulty connection to corrupted drivers. Throughout this guide, you will learn what the audio rendered error is and how to fix it on your own.
- 1 What Does the Audio Renderer Error Mean?
- 2 Why Do I Keep Getting Audio Renderer Error?
- 3 Application Effected/ Instances The Error Occurs
- 4 How to Fix Audio Renderer Error
- 4.1 Method 1: Re-plug the Audio Playback Device
- 4.2 Method 2: Restarting the Audio Device
- 4.3 Method 3: Restart the Computer
- 4.4 Method 4: Reset, Rollback, or Update The Audio Device
- 4.5 Method 5: BIOS Update (Specific to Dell Computers)
- 4.6 Method 6: Run the Audio Troubleshooter
- 4.7 Method 7: Specific fix for ASIO Driver Conflict
- 5 No Easy Way Out
What Does the Audio Renderer Error Mean?
The audio renders error or video rendering error will occur when the audio Renderer cannot sustain a single stream per second. Instead, an error causes it to either take the time or completely go out of sync with the Windows Operating System (OS).
Such a problem may be triggered by different things, as explained below. In either case, you will not be able to stream content on your favorite streaming platform until the problem is resolved.
Why Do I Keep Getting Audio Renderer Error?
Most users get the “audio rendered error, please restart your computer” message every once in a while. In such a case, restarting the computer should clear the error message. If you keep getting the error message more frequently, you could be having a more serious problem. Some of the things that may cause the audio renderer error to recur more frequently include: :
If you are getting this error message on a Dell computer, the problem is most likely a corrupted software update. The developer has fixed most of the bugs since. As such, updating to the latest BIOS version should resolve the problem. Many Dell users have found this to be very effective at clearing the audio Renderer error message.
YouTube does not encourage the use of AdBlocking software. As a matter of fact, using one is a violation of their terms and conditions. Some AdBlocker applications are known to interfere with the normal functioning of this platform, which may trigger the audio renderer error message.
If you have one installed on your computer, you should consider deactivating it before accessing your favorite streaming platform to avoid this error.
Audio Driver Glitches
Some computer motherboard models tend to experience more glitches that others. A bug in the audio drivers of your computer may also lead to this problem. However, such an issue is relatively easy to resolve. You may turn the audio driver off temporarily, unplug the headphones or restart the PC to fix the issue.
Conflict Between ASIO Drivers and Audio Drivers
If the Audio Stream Input/output (ASIO) audio card on your computer happens to conflict with the audio driver, you may end up getting the audio renderer error as well. In most cases, this happens when you use both the Windows sound driver and the ASIO card at different sound format frequencies. If this is the problem in your case, synchronizing the two frequencies can clear this error code effectively.
Application Effected/ Instances The Error Occurs
Most of the users who have come across this error encounter it while trying to stream audio or video files on YouTube. However, some users have also reported encountering the “audio renderer error. Please restart your computer” message while streaming music on iTunes.
You may also get this error while using other online streaming platforms or even when you are using a built-in CD player. Again, the error is not specific to any browser. You can get it while using the Mozilla Firefox, Edge, Chrome, Opera, or any other browser for that matter. Other Instances that are commonly associated with the audio renderer error include:
Voicemeeter Banana Audio Renderer Error
VB-Audio VoiceMeeter Banana is an advanced audio mixer application that features a Virtual Audio device that is used as Virtual I/O to manage and mix any audio source. Though beneficial, this application may lead to Voicemeeter Banana audio renderer error.
This often happens when you fail to configure the application as the default playback device. If this happens, Voicemeeter tends to use the playback device in exclusive mode by default. This prevents other applications, including video players, form using the playback device, which triggers the audio renderer error.
Audio Renderer Error YouTube
This is the commonest occurrence instances of the audio Renderer error. When you try to stream content on YouTube, you get an “Audio renderer error. Please restart your computer” notification. The occurrence of the error in YouTube may be triggered by different things, including AdBlocker apps, corrupt BIOS, or just an audio driver problem.
Audio Renderer Error Dell
The BIOS on Dell computers, especially the Del XPS 13 PC, is known to have bugs that predispose it to the audio renderer error. This being the case, the Audio renderer error code is more common in Dell computers, especially the 9343 model, than it is in other computer makes and models.
The manufacturer claims that the bugs have been addressed since, Therefore, an upgrade to the latest BIOS version should clear the error in your Dell PC. There are several other steps you can take to clear this error, but most of them offer a temporary fix. So, just go ahead and the latest BIOS and XPS 13 audio drivers.
Asio4all Audio Renderer Error
A conflict between the ASIO drivers and the audio drivers in your computer can also trigger the audio renderer issue. This occurs when the audio format frequencies in the ASIO drivers and the audio drivers are different.
If this is the problem in your case, restarting the computer may clear the error. However, you may also need to set the same sample rate for both the ASIO driver and the audio driver on your computer, as explained later in this guide.
How to Fix Audio Renderer Error
The most effective remedy for the “audio renderer error. Please restart your computer” malfunction will try from one case to another. The right solution will mainly depend on what is triggering the error in your case.
The solutions range from the simpler operations like restarting the PC to advanced troubleshooting and repair solutions. Elaborated below are the seven repair methods you can use to clear the audio renderer error message:
Method 1: Re-plug the Audio Playback Device
While streaming audio and video files on YouTube, a good number of users prefer listening through jack, or USB audio devices like earphones and external speakers. If you get the audio renderer error message with such a playback device connected. It is advisable to disconnect it and then reconnect it to the PC.
Unplugging and then re-plugging the external playback device has been proven to be effective at resolving this error with both Jack and USB toggle devices. Again, connecting multiple audio playback devices to your computer, especially the ones running on Windows 10, at once can also trigger the audio renderer error.
In such a case, you should disconnect all the audio playback devices and only reconnect the one you are currently using. In not cases, you will only get a temporary fix, the error message may resurface sooner rather than later.
Method 2: Restarting the Audio Device
If re-plugging does not clear the error, try restarting the audio device in your computer. To achieve this, you should open the device manager. On the device locate the “Audio inputs and outputs” option and stretch it.
Navigate to the driver you are currently using for your audio device and right-click on it to select “Disable Device”. Confirm this selecting and allow the computer some time to complete the operation. Now right-click in the same driver yet again and select “Enable Device”.
Confirm the selection, close the device manager Window, and check to see whether the error has cleared.
Method 3: Restart the Computer
Jus as recommended by the error prompt, restarting your PC can fix the audio renderer problem. You may just select the restart option from the start menu to restart your computer. Alternatively, you can shut it down and start it afterward.
Just like the above-described solution, restarting your computer only offers a temporary fix for the problem. However, it will allow you to continue streaming for a few minutes to days before the error resurfaces. As such the method is only ideal for users looking for a quick fix for the “audio renderer error. Please restart your computer’ issue.
Method 4: Reset, Rollback, or Update The Audio Device
If you started getting this error message after altering the audio device drivers on your computer, you should consider resetting, updating, or rolling them back. Some driver upgrades may have bugs that trigger this error.
If this is the problem in your case, rolling back to an earlier software version that used to work can solve the problem. To carry out these operations, you should press the Windows Key + R key combination simultaneously to open the Run dialog box.
Type devmgmt.msc into the box and press enter. This will open the Device Manager. Alternatively, you could just type Device Manager into the Windows search box and press Enter. Having opened the Device Manager, you can now proceed to reset, upgrade, or roll back the driver as follows:
Option One: Resetting/ Restarting the Driver
On the Device Manager Window, expand the “Audio inputs and outputs” option. Now right-click on your audio device and select “Disable Device”. Wait a few seconds before right-clicking on the same device again to Enable the device.
This operation will reset the driver to default, and possibly clear the audio renderer error.
Option Two: Updating the Driver
On the Device Manager window, expand the “Audio inputs and outputs” option and select your audio device. Right-click on the audio device, and select the “Update Driver” Option. Now select “Search automatically for updated driver software” in the Window that comes up.
If you will be looking for the upgrade online, you need to ensure that the computer is connected to the internet before clicking OK. Allow the computer enough time to automatically search for driver upgrades and install them.
Option Three: Rollback the Driver
Though not common, driver upgrades can also have glitches that trigger the audio renderer error. If you started encountering the error shortly after an upgrade, you should consider rolling back to the former version to clear the audio renderer error.
To achieve this, you need to right-click on the audio device and select properties. Navigate to the “Driver Tab” and look for the “Roll-Back Driver” button. Click on this button and follow the on-screen prompts that come up to rollback your drivers.
Once the process is completed, restart the computer and check whether the problem was resolved.
Method 5: BIOS Update (Specific to Dell Computers)
Earlier Dell BIOS versions used to have a number of bugs that could actually trigger the audio renderer error. As a result, there are numerous complaints about Dell computers, regarding this error. The provider addressed those concerned and came up with a new version of the BIOS that does not have such bugs.
If you are getting the “audio renderer error. Please restart your computer” message more frequently on your Dell computer, just upgrade to the latest BIOS version. The Dell Support page illustrates how you should go about the upgrade to avoid further problems.
Note: Updating the BIOS is a rather sensitive operation on any computer. If not carried out properly, it can affect the functioning of the system or even render it useless altogether. Be sure to read the guide on the Dell Support page thoroughly before attempting this upgrade.
Method 6: Run the Audio Troubleshooter
Windows 10 features built-in troubleshooting tools that may be used to diagnose and automatically resolve common problems. You may use the Audio troubleshooter in Windows 10 to troubleshoot and fix the audio renderer error.
To run this tool, press the Windows Key + R key combination to open the Run dialog box. Type ms-settings: troubleshoot into the box and press Enter. Now select the “Playing Audio” option and then click on “Run the troubleshooter”.
Once the investigation phase is done, choose the device to would like to troubleshoot from the drop-down menu. If the selected audio playback device has a problem, the tool will display the right repair option. Just click on “Yes” and follow the on-screen prompts to have the problem fixed automatically.
Method 7: Specific fix for ASIO Driver Conflict
Do you have the ASIO audio device setting software installed on your computer? If so, getting the audio renderer error while Cubase is open can only mean one thing; the ASIO device is conflicting with your Windows Sound system.
To solve the problem you will need to set the same sample rate for both the ASIO driver and the audio driver. To carry out this synchronization, just follow these steps:
Step 1: Open the Sounds Window
open the Run dialog box by pressing the Windows Key + R key combination. Now type mmsys.cpl into the box and hit Enter. If you are not comfortable running the commands, just right-click on the Speakers icon on the bottom right corner of your desktop, and select “Sounds.”
Step 2: Access Device Properties
On the Playback tab, select your desired audio device, such as “Speakers” and then clock on the “Properties” button. Navigate to the Advanced tab and choose your preferred sample rate from the drop-down menu in the “Default Format” section and click OK.
Step 3: Configure ASIO Driver Settings
Open the ASIO driver settings on your computer and navigate to the Audio tab. Under the “Sample rate” section, click to reveal a drop-down menu. Select the exact same sample rate from this list as you set in the Sounds Properties Window.
Click OK to implement. Once you are done, restart the computer for the settings to take effect.
No Easy Way Out
The audio renderer error can occur on any Windows operating system version and maybe triggered by different things. The simplest and fastest way to fix this problem is to restart your computer or disconnect and reconnect the audio device.
However, such solutions do not seem to offer a permanent remedy for this problem, and the error may recur after some time. If that happens, you should try the more advanced remedies discussed in this guide to fix the “audio renderer error. Please restart your computer” issue once and for all.