Local Area Connection Doesn’t Have a Valid IP Configuration [Solved]


Windows users have sometimes complained about not being able to access the internet after a recent update. This could be due to the network interface card’s failure to get a valid IP address from the DHCP server. This error can ruin your experience while surfing the web. However, you can quickly fix it. In this article, I will show you some useful steps that will help you fix this error.

The error message “Local Area doesn’t have a valid IP configuration” may pop up in cases where your NIC (Network Interface Card) fails to get a valid IP address from the DHCP server. This error is mostly caused by: An incompatible NIC driver, Incorrect network configuration, Faulty NIC card. Additional causes are Outdated network adapter software and Antivirus software. Nonetheless, whatever the cause is when seeing this error message, you should fix it with the steps I detailed within the next section.

How to Fix This Error?

Whether you are trying to surf the internet at your leisure or doing some research on a topic, you most likely have encountered the error message. There is no need to worry. All you have to do is follow the steps listed below.

Solution 1 – Modifying The Value Of Network Connection

One useful technique to fix this connection error problem is modifying the value of your connection. You can achieve this by following the listed steps below.

Step 1: Press the Window key, and I key at the same time to open Settings
Step 2: Choose the Network & Internet option.
Step 3: Go to the Status tab and then click Change adapter options in the right panel.
Step 4: Right-click the network adapter that you are using to choose Properties.
Step 5: Click on Configure and then navigate to the Advanced tab. Choose Network Address in the Property section and change its value to random 12 alphanumeric characters. For example, choose 20GF23FE8630, and then click OK to save changes.
Step 6: Restart your computer and try connecting to the internet.

If you couldn’t solve the problem after modifying the network connection, move down to the next potential solution below.

Solution 2 –Reinstalling Your Network Adapter Software

An outdated or corrupted network driver may be the cause of the error. We recommend that you update and install the latest driver for your network adapter to ensure an Outdated, incompatible driver is not causing the issue.

You can visit the device manufacturer website to download the latest available network adapter driver to install it. Installing the network driver does the trick in most cases. Here’s a quick guide on how to do that:

Step 1: Hold down the Windows logo key and press the R key to open a Run box. Next, type devmgmt.msc in the box then click OK.
Step 2: Find and expand the Network adapters catalog. Then right-click on the adapter you’re using.
Step 3: Click the Uninstall device option to confirm the uninstallation.
Step 4: Now head to the manufacturer’s website of your network adapter. Download and install the newest driver for it.
Step 5: If you cannot access the internet due to this error, download the driver from another computer with a network connection. 

Alternatively, you can:

Step 1: Install driver easy on your device.
Step 2: Open the Driver Easy software and click the Scan Now button. This allows Driver Easy to scan your computer and detect any problem drivers.
Step 3: Click Update All to automatically download and install the correct version of all the missing or outdated drivers.
Step 4: You can try restarting your computer to check if the error appears again. 

If the problem is still not solved after doing this, move down to the next potential solution below.

Solution 3 – Changing Network Adapter Settings

You can change the network adapter settings by following the steps below.

  • Step 1: Hold down the Win + R keys simultaneously to access the Run box.Step 2: Enter ncpa.cpl in the box and then click on OK. This will open Network Connections.Step 3: Access your network connection and right-click it to choose Properties.
    Step 4: In the Properties window, choose the Internet Protocol Version 4 (TCP/IPv4) and then click on Properties.
    Step 5: Select to Use the following IP address, then enter the IP address, Subnet mask, Default gateway.
    Step 6: Select Use the following DNS server addresses then enter the Preferred DNS server and Alternate DNS server. Click on OK to save changes and then check if you have fixed the error.Solution 4 – Check that the IP address is set to obtain automatically. Check the network configuration and ensure it is set to automatically obtain the DNS server address and an IP address from the DHCP server. To check and configure it to receive automatically here’s what you should do:
  • Step 1:  Press Windows +R keys
    Step 2: Type ncpa.cpl and hit the enter key.Step 3:  Right-click on your active network connection then select the properties option. Double click on Internet Protocol Version 4 (TCP/Ipv4)Step 4: make sure Obtain an IP address automatically and Obtain DNS server address automatically are checked. 
    Step 5: Click OK to save changes.

    Solution 5: Disable The Antivirus Software

    Sometimes the error may be due to antivirus software installed on your PC. If this is the case, you can disable it for a while and check whether the problem settles or not. If it does, try downloading any other antivirus security program from the internet.

    Conclusion

    The error message ‘Local Area Connection Doesn’t Have a Valid IP Configuration’ is not new to many Windows 10 users. Getting rid of it can be tricky sometimes, but you can do it. In this article, I have equipped you with the solutions needed to fix this error. Now it’s your turn to perform these solutions and fix this problem. 

Roman Markovich

My Name is Roman Markovich. I been IT professional for the last 10 years. I am was hoping to establish to help many users with OS errors. I hope you will enjoy our content.

Recent Content